Outdoor & Security Lighting in Darwin.
Sensor lights at the doors, flood lighting over the yard, and something decent over the entertaining area so it can actually be used at night. The trick up here is specifying gear that survives the wet season instead of rusting out by March.
Popular requests
Most Outdoor Lights Up Here Fail Early
Not because they were bad lights, but because they were never rated for what Darwin does to them. Humidity gets inside cheap fittings, salt air eats the fixings on the coastal side, and driving wet season rain finds any seal that was done in a hurry.
We specify to the conditions and seal properly. It costs a bit more on the day and it is the difference between a fitting that lasts years and one you replace every dry season.
Getting Outdoor Lighting Right
Three things that decide whether you like it in two years.
Placement Beats Brightness
A badly placed flood light blinds you walking up your own driveway and leaves the shadows exactly where an intruder would stand. Where it points matters more than how many lumens it makes.
Sensors That Do Not Nuisance Trip
A sensor aimed across a road or over a palm tree triggers all night, and people end up switching the whole thing off. Aim and range get set on site, not in a catalogue.
Sealed for a Darwin Wet
The failure point is almost always where the cable enters the fitting. Doing that properly is unglamorous and it is what makes the difference.
What People Ask For
Outdoor lighting across Darwin, Palmerston and the rural blocks.
Security and sensor lighting
The most common request, and the one where placement matters most.
- Sensor lights at entries and side access
- Flood lighting over driveways
- Coverage without blinding your own front door
- Aimed and range-set on site
Entertaining and outdoor areas
Making a patio, deck or pool area genuinely usable after dark.
- Patio and pergola lighting
- Pool and pool surround
- Dimmable where it suits
- Weatherproof outlets while we are there
Garden and pathway
Lower level lighting that makes a yard look finished and keeps paths safe.
- Path and step lighting
- Garden bed and feature lighting
- Low voltage where appropriate
- Timers and photocells
Replacing failed fittings
Very common in Darwin. Usually the fitting was never rated for the conditions.
- Corroded or water-filled fittings
- Sensors that stopped working
- Yellowed or cracked housings
- Upgrading halogen flood to LED
Recent Lighting Work
Outdoor and security lighting across Darwin and the rural NT.
From First Look to Installed
Outdoor lighting is worth looking at on site before quoting.
Leave Your Details
Name, number and what you need. We ring you back and ask what you want lit — security, entertaining, garden, or all three.
We Come Out and Look
Placement, aim, sensor coverage and where power can come from. We go over it with you on site.
We Quote the Job
Complete price including fittings, so there is nothing to add afterwards.
Install and Set Up
Fitted, sealed properly, sensors aimed and ranges set with you there.
While We Are Out There
Outdoor lighting nearly always turns into a conversation about weatherproof power points for the patio, or a sub-main to the shed. If you have been meaning to sort those out, mention it when we come and we will price it all together rather than you paying attendance twice.
Related Advice
Guides from our team on this kind of work.
Needed some electrical work done in a short time period. Shane came out, checked what needed doing, was prompt and professional. Anthony came 2 days later and did the work very professionally. Highly recommended, 10/10.— David B.
Friendly, professional and excellent service. Will recommend to anyone, and will use again!— Kerry B.
Great communication, great work, fair prices. They told us they do domestic electrical work so we’ll definitely be contacting them for future works. Highly recommended.— Alexander G.
Frequently asked questions.
What people ask about outdoor lighting in Darwin.
Why do outdoor lights fail so fast in Darwin?
Humidity, salt air on the coastal side and driving wet season rain. Cheap fittings let moisture in around the cable entry and that is the end of them. Specifying gear rated for the conditions and sealing it properly is most of the job.
Where should sensor lights go?
Entries, side access and anywhere someone could stand out of sight. Just as important is where they point — aimed across a road or over a tree that moves in the wind, they trigger all night and get switched off. We set aim and range on site with you.
Can you light the pool and entertaining area?
Yes, and it is one of the more satisfying jobs. Pool areas have specific requirements around where fittings can go, so it is worth having someone look at it rather than working off a catalogue.
Do you supply the fittings?
Usually, and we would recommend it — we can pick gear that will survive up here rather than what looked good in a hardware aisle. If you have already bought fittings we are happy to install them.
Will it need a new circuit?
Sometimes. A few sensor lights usually go on existing circuits, but flood lighting and larger installations may need their own. We check the board when we come out.
How much does outdoor lighting cost?
It depends on how many fittings, where power has to come from and access. These jobs vary a lot, so we come out and go over it with you rather than guessing a number over the phone.
Related Services
Other work Flynn’s handles across Darwin, Palmerston and the rural NT.
Get an Outdoor Lighting Quote
Leave your details and we will ring you to go through what you want lit and why. For outdoor work we will usually want to come out and look at placement before quoting.
Phone: (08) 7918 1115
Area: Darwin, Palmerston & Rural NT
Request a quote
Outdoor lights rusted out again?
They were probably never rated for up here. Let’s do it properly this time.